NEC ElectraElite IPK, Programing Manual

Page: 546 / 719

Elite IPK Document Revison 1
Programming Manual 2 - 475
___________________________________________________________________________________
___________________________________________________________________________________
4-18 Station Name Assignment
General Description
Use this Memory Block to assign names for telephone stations.
Display
Notes
Programming Procedures
1 Go off-line.
2 Press LK4 +
AH
to access the Memory Block.
3 Use the dial pad to enter data.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or Tel Port No.
– OR –
D
to go to next assigned Tel Port No.
H
to clear data when cursor is at setting data
B
+
A
to enter A for Port Numbers 100~109
B
+
B
to enter B for Port Numbers 110~119
B
+
C
to enter C for Port Number 120
Default Values
Not Specified
4 Press
G
to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E
to go back on-line.
1. While an internal line is ringing or in use, the station number and name of the other party are displayed.
2. The name is not displayed when Tone Override, Automatic Callback, or Callback Request is displayed.
3. Only six digits/characters can be used for each name.
4. Telephone ports A0~C0 are ports 100~120.
5. Refer to Appendix B Character Codes , Section 1 Character Assignment on page B-1 for the procedure for
entering station names using the dial pad instead of the ASCII Character Code Tables.
Telephone Mode
4
Submode
—
Data No.
18
PC Programming
¦
+BTT
Data
No.
0 1 / 1 8 : < >
T I M E D I S P L A Y
Tel
Port
No.
(01~C0)
Setting
Data