Elite IPK
Document Revison 1
Programming Manual
2 - 477
___________________________________________________________________________________
___________________________________________________________________________________
Notes
3
Press the CO/PBX line key corresponding to each CO/PBX line.
The LED indication changes to indicate data each time a CO/PBX line key is pressed.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or Tel Port No.
– OR –
D
to go to next assigned Tel Port No.
C
to go to the next page
A
to go to the previous page
H
to clear data when cursor is at setting data position
B
+
A
to enter A for Port Numbers 100~109
B
+
B
to enter B for Port Numbers 110~119
B
+
C
to enter C for Port Number 120
Default Values
Not Restricted
4
Press
G
to write the data and display the next Memory Block.
5
Program the next Memory Block or press
E
to go back on-line.
1.
A restricted CO/PBX line allows the station user to answer an incoming call or access a held call, but does not
allow a user to originate a CO/PBX call.
2.
When restricted is specified in this section, the data in Memory Blocks 4-07 [Code Restriction Class Assignment
(Day Mode)] and Memory Block 4-08 [Code Restriction Class Assignment (Night Mode)] is treated as invalid
even if specified.
3.
Telephone ports A0~C0 are ports 100~120.
Programming Procedures (Continued)
CO/PBX
Line Key LED
Off
On
Data
Not Restricted
Restricted
The shaded selection
is the default.
Summary of Contents for ElectraElite IPK
Page 2: ...PROGRAMMING MANUAL Stock Number 750825 Document Revision 1 Release 1000...
Page 3: ......
Page 5: ......
