NEC ElectraElite IPK, Programing Manual

Page: 34 / 719

Elite IPK Document Revision 1
Programming Manual 1 - 3
___________________________________________________________________________________
___________________________________________________________________________________
H
Two Multiline Terminals, connected to ports 01 and 02, respectively, can
be used simultaneously for programming.
2.2 System Programming Modes
Modes and submodes are listed in Table 1-1 Programming Modes .
Table 1-1 Programming Modes
Line
Key
Mode Name
Line
Key
Submode Name
LK 1 System Mode
LK 1 CO Line
LK 2 ICM
LK 3 SLT
LK 4 Transfer/Automated Attendant
LK 5 SMDR/LCR
LK 6 DSS
LK 7 ESP
LK 8 PBR/Miscellaneous
LK 9 DISA
LK 10 Call by Call
LK 11 DTI
LK 12 ACD/UCD
LK 13 PRI
LK 14 ARS
LK 15 K-CCIS
LK 16 HUB
LK 2 Tenant Mode
N/A N/A
LK 3 CO/PBX Line Mode N/A N/A
LK 4 Telephone Mode N/A N/A
LK 5 Trunk Group Mode N/A N/A
LK 6 Copy Mode
LK 2 Tenant Mode Copy Assignment
LK 3 CO Line Mode Copy Assignment
LK 4 Telephone Mode Copy Assignment
LK 5 Trunk Group Mode Copy Assignment
LK 7 ETU Mode
LK 1 Card Interface Slot Assignment
LK 2 Telephone Type Assignment
LK 3 MIF Assignment