NEC ElectraElite IPK, Programing Manual

Page: 460 / 719

Elite IPK Document Revison 1
Programming Manual 2 - 389
___________________________________________________________________________________
___________________________________________________________________________________
3-12 Trunk-to-MOH Trunk Assignment
General Description
Use this Memory Block to specify the music on hold source for each CO/PBX line.
Display
Notes
Programming Procedures
1 Go off-line.
2 Press LK3 +
G
+
AB
access the Memory Block.
3 Enter data for CO/PBX No. using the dial pad to assign the music selection.
Use the following to enter data:
J
to move the cursor left
L
to move the cursor right
K
~
I
to enter numeric data or CO/PBX No.
– OR –
D
to go to the next assigned CO/PBX No.
Default Values
00 = Not Assigned for CO/PBX No. 01~64
4 Press
G
to write the data and display the next Memory Block.
5 Program the next Memory Block or press
E
to go back on-line.
Related Programming
M.B. Number Memory Block Name
1-4-17 Automated Attendant Delay Announcement Hold Tone Selection
1-8-09 Music on Hold Pattern Selection
1-8-31 Hold Tone Source Assignment
1-8-32 Hold Internal Tone Volume Selection
3-11 CO External Source Selection
4-66 MOH or Ring Back Tone Selection
1. When set to 00, the CO gets Music on Hold from the MOH jack on the side of the cabinet.
2. When Memory Block 1-8-31 (Hold Tone Source Assignment) is set to INT, this Memory Block is not used.
CO/PBX Line Mode
3
Submode
—
Data No.
12
PC Programming
¦
+BCT
0 1 1 2 : H O L D C O 0 0
T I M E D I S P L A Y
Data
No.
Setting
Data
CO/PBX
No.
(01~64)
Title Title