NEC ElectraElite IPK, Programing Manual

Page: 270 / 719

Electra Elite IPK Document Revision 1
Programming Manual 2 - 199
___________________________________________________________________________________
___________________________________________________________________________________
Related Programming
Refer to individual features in the Electra Elite IPK Features and Specifications Manual.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 +
AC
to access the Memory Block.
3 Press corresponding CO/PBX line key to change data option.
Use to the following to enter data:
K
~
I
to enter VRS Channel and message number
J
to move cursor left
L
to move cursor right
C
to go to the next page
A
to go back to the previous page
Default Values
All Channels of Block: No Message
4 Press
G
to write the data and advance to the next message. After Message No. 16, the next VRS is displayed.
5 Repeat Steps 3 and 4 for each message for each VRS. The next Memory Block is displayed.
6 Program the next Memory Block or press
E
to go back on-line.