Following parameters are available:
Parameter
Description
TIME Section
MODE
Here you can select either
SPLIT
,
GRID
,
DETECT
or
MANUAL
:
Split mode: The Sample will be sliced into equally spread Slices.
Grid mode: The Sample will be sliced according to note values.
Detect mode: The Sample will be sliced according to its transients.
Manual mode: You can manually slice the Sample as you see fit.
SLICES
(Split and
Grid mode only)
When
MODE
is set to
SPLIT
(see above),
SLICES
lets you choose the
amount of Slices: 4, 8, 16 or 32.
When
MODE
is set to
GRID
(see above),
SLICES
lets you choose the
length of the Slices in note values: 4th, 8th,16th or 32nd notes.
SENSITIVITY
(Detect
mode only)
When
MODE
is set to
DETECT
(see above),
SENSITIVITY
lets you
adjust the sensitivity of the transient detection. Higher values will
cause more Slices to be detected because more transients will be
recognized, lower values will result in less Slices. This parameter
should be adjusted until all the musically significant slices are being
detected in the waveform.
BPM
(BPM Mode)
Selects how the tempo is defined: If you select
AUTO
, MASCHINE
will calculate the tempo automatically. If you select
MANUAL
, you
can enter the tempo in BPM manually.
ADJUST
If
BPM
is set to
AUTO
, you can choose between
the tempo that
MASCHINE detected, or half or double of that tempo. If
BPM
is set
to
MANUAL
, you can adjust the tempo manually.
When
MODE
is set to
DETECT
, a second section of parameters is available at the bottom of the
display: the
ENGINE
section.
►
When
MODE
is set to
DETECT
, press
NAV
+ the Right Arrow button to show the
ENGINE
section.
Sampling and Sample Mapping
Slicing a Sample
MASCHINE MIKRO - Manual - 855
Summary of Contents for Maschine Mikro MK2
