Native Instruments Maschine Mikro MK2 Manual Download Page 591

Page: 591 / 928

Control

Description

Channel

Selects the MIDI channel on which the Sound will send MIDI data.

By default Sound slot 1 will send MIDI data on channel 1, Sound
slot 2 on channel 2, etc.

Transpose

Applies an offset to the MIDI note numbers before the notes are
sent. Values range from -48 (downward transposition by 48

semitones, i.e. four octaves) to +48 (upward transposition by 48
semitones, i.e. four octaves). The default value is 0.

Configuring MIDI Output for Sounds in Mix View

You can also easily configure the MIDI output of your Sounds in MASCHINE’s Mixer:
1.

Click the Mix View button on the left of the Arranger to switch from Arrange view to Mix
view:

Open the extended view of the Mixer by clicking the down-pointing arrow on the left of the
Mixer:

Check that the

button is active on the left of the Mixer — if not, click it to enable it

and display the input/output settings of each channel strip.

Audio Routing, Remote Control, and Macro Controls

Using MIDI Control and Host Automation

MASCHINE MIKRO - Manual - 591

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Maschine Mikro MK2

Reviews:

Brands by name

Popular brands

Native Instruments Maschine Mikro MK2, Manual

Search results

Summary of Contents for Maschine Mikro MK2

Reviews:

Brands by name

Popular brands