manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 389

Element

Description

Tune

Adjusts the pitch of the drum played by the middle C, measured as

a percentage. Available values range from 0.0 % to 100.0 %
(default: 50.0 %). For more details see 

↑

9.1.5, Pitch Range,

Tuning, and MIDI Notes

.

Decay

Adjusts the duration of the sound’s tail, measured as a percentage.

Available values range from 0.0 % to 100.0 % (default: 50.0 %).

Skin Tune

Adjusts the fine-tuning of the skin of the drum, measured as a
percentage. Available values range from 0.0 to 100.0 % (default:
50.0 %).

Impact

Adjusts how hard the drum is hit, measured as a percentage.
Available values range from 0.0 % (softest) to 100.0 % (hardest).
The default value is 75.0 %.

Body

Adjusts the level of the snare body independently from the wires
level adjusted on the 

Advanced

 page (see below). Available values

range from 0.0 to 100.0 % (default: 75.0 %).

Noise

Adjusts the level and duration of the wires sound applied to the
drum, measured as a percentage. Available values range from 0.0 to
100.0 % (default: 40.0 %).

Advanced Page

For this engine the 

Advanced

 page does not contain any parameters.

Modulation Page

As with all other engines and Drumsynths, the 

Modulation

 page contains one parameter: 

Veloc-

ity

.

Using the Drumsynths

The Snares

 

MASCHINE MIKRO - Manual - 389

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands