manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 739

Main Page

Parameter

Description

MODE

 

Mode

Select an effect.

TOUCHSTRIP

 

Engage

Activates the effect. When activated, feeds a burst of signal
into the effect according to the length set by the Feed
parameter.

TS Assign

Assigns the control to Feedback or Time.

Feedback

: Sets the delay feedback when the effect is

activated. The feedback is reduced when the effect is
disengaged.

ECHO

 

Time

Controls the delay time, either continuously or in quantized
divisions according to the Time Mode.

Time Mode

Sets the rhythm mode of the delay, either in quantized note
divisions (Straight/Dotted/Free) or unquantized (milliseconds).

Filter

Adjusts the LP and HP filter in the feedback loop. At 0%, the
filter is fully open. At higher values, the HPF frequency
increases and LPF frequency decreases for more aggressive
filtering.

Wet Level

Adjusts the volume of the delayed signal.

Effect Reference

Perform FX

 

MASCHINE MIKRO - Manual - 739

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands