manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 329

Sampler parameters – page 4 of 6: MODULATION ENVELOPE and DESTINATION in the software.

MODULATION ENVELOPE

The 

MODULATION ENVELOPE

 section offers an additional envelope allowing further modifica-

tion  (or  “modulation”)  of  specific  Sampler  parameters  according  to  the  way  you  play  on  the
pads. Its parameters are matched to those of the 

AMPLITUDE ENVELOPE

 section on page 2

(see 

↑

7.2.1, Page 1: Voice Settings / Engine

), so that you have either an ADSR (Attack, Decay,

Sustain, Release) envelope or an AHD (Attack, Hold, Decay) envelope to modulate your param-
eters.  If  you  choose  One-shot  mode,  only  the  AHD  envelope  (pictured)  will  be  available  for
modulation.

Envelope Controls

Description

Attack

The time it takes for the envelope to reach its maximum level.

Hold

How long the envelope will stay at its maximum level.

Decay

With 

Decay

 you adjust how fast the envelope drops to the sustain

level in ADSR mode; in AHD mode it is used to adjust how fast the
envelope fades out.

Sustain

The envelope level that will be maintained as long as the note is
played.

Release

The time for the sustain level to return to zero after the note has
ended.

DESTINATION

This is where you define modulation targets for the modulation envelope, i.e. the parameters
you want this envelope to control. The knobs adjust the amount of modulation for the following
targets:

Working with Plug-ins

The Sampler Plug-in

 

MASCHINE MIKRO - Manual - 329

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands