manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 735

Parameter

Description

Engage

Activates the filter.

Frequency

Sets the cutoff frequency according to the min/max range

parameters.

FILTER

 

Type

Selects from Low Pass, Band Pass and High Pass modes.

Resonance

Sets the resonance of the filter. Values over 100% will lead
to self-oscillation—be careful! Turn down the Output Gain
(and turn up the Saturation to compensate) in order to avoid
extremely loud ringing. Note that the resonance will sound
more pronounced at lower saturation settings and vice versa.

Setup Page

Parameter

Description

RANGE Section

 

Min. Freq

Sets the lower limit for cutoff frequency.

Max. Freq

Sets the upper limit for cutoff frequency.

SATURATION Section

 

Saturation

Sets the input gain of the filter.

Out Level

Sets the output gain of the filter.

15.7.2 Flanger

 

A comb filter effect with more than a few tricks up its sleeve. Get performance-ready flanger or
phaser effects, or expose its wild side – setting higher decay and frequency values unleashes
ping-pong delay-like flutter effects.

Effect Reference

Perform FX

 

MASCHINE MIKRO - Manual - 735

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands