manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 137

Note that the Library is the only other way to display and access your files: You could also navigate
to the same files in your file system. The (substantial) difference lies in the fact that the Library

organizes your files in a 

musically relevant

 way.

Which Files are Included in the MASCHINE Library?

The files included in the MASCHINE Library are all MASCHINE-relevant files found in the fold-
ers whose paths are listed in the 

Library

 page of the 

Preferences

 panel. For more information

on how to manage these library folders, please refer to 

↑

3.6.4, Preferences – Default Page

.

4.1.2

Browsing the Library vs. Browsing Your Hard Disks

 

The  Browser  is  your  interface  to  the  MASCHINE  Library.  It  provides  all  necessary  tools  to
search for the files you require — and suggest other files you might not have thought of. Be-
side this, the Browser also allows you to navigate your file system in a classic way. Both are
described in the next section.
The Browser provides two operation modes, each of them providing its own tools:

▪

The 

LIBRARY

 pane allows you to browse the MASCHINE Library. This is the preferred way

to search for files meeting particular musical requirements. This pane also allows you to
tag your own files to your liking.

▪

The 

FILES

 pane allows you to browse your hard disks by using the hierarchical folder struc-

ture of your operating system. For example you can use it to navigate files that have not
been imported into the MASCHINE Library — and you can import them from there!

In contrast to the software, the Browser on your controller can only load files that have already been

added  to  the  Library.  You  cannot  directly  access  specific  directories  on  your  hard  disks  with  the
Browser using the controller. This is why you should always import all your files to the Library and
tag them using the software beforehand.

Switching Between LIBRARY and FILES Pane

►

To show the 

LIBRARY

 pane or the 

FILES

 pane of the Browser, click the corresponding tab

at the top of the Browser.

Browser

Browser Basics

 

MASCHINE MIKRO - Manual - 137

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands