manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 880

Mouse/Keyboard Action

Command

Hold [Ctrl] ([Cmd] on macOS) and

click several Zones

Selects all clicked Zones. Click a selected Zone to

deselect it (i.e. remove it from the selection).

Hold [Shift] and click two Zones

Selects both Zones and all Zones in-between.

Click and drag a selection frame in
the Sample Map

Selects all Zones within or overlapping the frame.

Press [Ctrl]+[A] ([Cmd]+[A] on
macOS)

Selects/deselects all Zones. When deselecting, only
the focused Zone remains selected.

Edit Commands

 

Drag the left/right border of a Zone

Adjusts the key range for the selected Zones.

Drag the higher/lower border of a
Zone

Adjusts the velocity range for the selected Zones.

Drag a corner of a Zone

Simultaneously adjusts the lowest/highest note and
the lowest/highest velocity of the selected Zone(s) —
depending on the corner.

Click inside a Zone and drag

Moves the selected Zone(s) across the Sample Map.
Note that the Root Key of each Zone is moved
accordingly.

Double-click a Zone

Extends the key and velocity ranges of the Zone so
that it fits the key and velocity limits of the neighbor
Zones. This can be very useful to quickly fill up any
key or velocity gap between Zones.

Right-click ([Cmd]-click on macOS) a
Zone

Opens the Sample Map menu (see below).

Press [Del] or [Backspace]

Removes the selected Zone(s) from the Sample Map.

You can also adjust the key and velocity ranges in the Zone settings at the bottom of the 

Zone

 page.

See 

↑

17.5.6, Adjusting the Zone Settings

 for a detailed description.

Sampling and Sample Mapping

Mapping Samples to Zones

 

MASCHINE MIKRO - Manual - 880

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands