manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 436

The Cymbal provides following engines:

▪

Crash (default): 

↑

9.7.1, Cymbal – Crash

.

▪

Ride: 

↑

9.7.2, Cymbal – Ride

.

For more information on engines, see 

↑

9.1.1, Engines: Many Different Drums per Drumsynth

. For

general  information  on  the  Cymbals  and  the  other  Drumsynths,  see 

↑

9.1,  Drumsynths  –  General

Handling

.

9.7.1

Cymbal – Crash

 

The  Crash  engine  creates  a  wide  range  of  cymbals:  from  a  typical  909-like  crash  to  more
acoustic sounding timbres. Its parameters provide a great range of expression and spectral var-
iation.

The parameters described below are presented as they appear in the Control area (Arrange view).
The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view) — for
more information please refer to section 

↑

13.4, The Plug-in Strip

.

Main Page

Element

Description

MAIN Section

 

Engine

Selects the engine used in the Cymbal plug-in. Available engines
include 

Crash

 and 

Ride

.

Tune

Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 0.00 to
100.0% (default value is 30.0%).

Decay

Adjusts the duration of the sound’s tail, measured as a percentage.
Available values range from 0.0 to 100.0% (default: 70.0%).

Impact

Adjusts the amount of click or initial attack, measured as a
percentage. Available values range from 0.0 to 100.0% (default:
70.0%).

Using the Drumsynths

The Cymbals

 

MASCHINE MIKRO - Manual - 436

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands