manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 874

1.

Right-click  ([Ctrl]-click  on  macOS)  the  desired  entry  in  the  Zone  List  and  select 

Load

Sample…

 in the menu that opens.

A Load Sample dialog opens up.

2.

Navigate to the desired audio file on your operating system and press [Enter] to confirm.

→

The dragged or selected Sample replaced the previous Sample in the target Zone.

Selecting a Zone in the List

►

Click any Zone entry in the Zone List to put it under focus.

→

The focused Zone gets highlighted in color both in the list and in the Map view (if visible).
In addition:

▪

The focused Zone is displayed in the Sample view and its settings appear in the Zone set-
tings at the bottom of the page. See section 

↑

17.5.6, Adjusting the Zone Settings

 for more

information on these settings.

▪

The  focused  Zone  also  appears  on  the 

Edit

  and 

Slice

  pages,  which  allows  you  to  further

process of its contained Sample. For more information on the 

Edit

 and 

Slice

 pages, please

refer to section 

↑

17.3, Editing a Sample

 and 

↑

17.4, Slicing a Sample

, respectively.

Selecting Multiple Zones in the List

You can select several Zones in the list at once using the common methods of your operating
system. The basic rules for multiple selection are the following:

▪

The focused Zone is automatically selected. It is highlighted in the color of the Sound and
its waveform and parameters are displayed in the 

Slice

 page’s 

Sample

 view and 

Zone

 set-

tings as well as on the 

Edit

 and 

Slice

 pages.

Sampling and Sample Mapping

Mapping Samples to Zones

 

MASCHINE MIKRO - Manual - 874

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands