Native Instruments Maschine Mikro MK2, Manual

Page: 78 / 928

Take Undo/Redo is an extended undo/redo available while recording that allows you to cancel
or re-execute a whole group of actions at once.
Take Undo/Redo is the default undo/redo in MASCHINE. In the software use the common key-
board shortcuts for the Undo and Redo functions:
►
To cancel your last group of actions, press [Ctrl]+[Z] ([Cmd]+[Z] on macOS). To re-exe-
cute your last group of actions, press [Ctrl]+[Y] ([Cmd]+[Y] on macOS). You can also se-
lect Undo and Redo from the Edit menu in the Application Menu Bar or from the Edit
submenu in the MASCHINE menu.
The commands in the Edit menu additionally shows which action will be undone/redone!
Undo/Redo on the Controller
Both Take Undo and Step Undo are also available on your controller:
1.
To undo a take, press SHIFT + pad 1 ( UNDO ).
2. To redo a take, press SHIFT + pad 2 ( REDO ).
3. To undo a step, press SHIFT + pad 3 ( STEP UNDO ).
4. To redo a step, press SHIFT + pad 4 ( STEP REDO ).
Take Undo is available in following situations:
▪
Recording in Control mode
▪
Recording in Step mode
▪
Recording modulation
Outside of these three situations, Take Undo has the same effect as Step Undo (see above).
3.3.4 Focusing on a Group or a Sound
To display the content and parameters of a particular Sound or Group, you first need to put it
in focus.
Basic Concepts
Common Operations
MASCHINE MIKRO - Manual - 78