manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 444

10.1.2 Bass Synth Parameters

 

Available from the both the Control area of the Arrange view and in the Plug-in Strip of the Mix

view, the parameters are as follows:

The  parameters  described  are  presented  as  they  appear  in  the  Control  area  (Arrange  view).  The

same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view). See 

↑

13.4,

The Plug-in Strip

 for more information on this.

Main Page

Element

Description

OSC Section

 

Shape

Adjusts the waveform shape continuously from sine to square. To
adjust the waveform shape, turn the 

Shape

 knob by clicking and

dragging upwards or downwards. The waveform shape can be
viewed in the Plug-in Strip of the Mix view.

Octave

Transposes the base key of the Bass Synth (range: -3 – 3). To
transpose the base key, turn the 

Octave

 knob by clicking and

dragging upwards or downwards.

Filter Section

 

Cutoff

Adjusts the frequency of the low-pass filter (range: 14.6 Hz – 23.7
KHz). To adjust the cutoff frequency, turn the 

Cutoff

 knob by

clicking and dragging upwards or downwards.

Resonance

Adjusts the amount of boost around the cutoff frequency (range:
0.0% – 120%), Resonance can start to self-oscillate when
increasing the amount over 100.0 %. To adjust the amount of
resonance, turn the 

Resonance

 knob by clicking and dragging

upwards or downwards.

Envelope Section

 

Using the Bass Synth

Bass Synth – General Handling

 

MASCHINE MIKRO - Manual - 444

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands