manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 445

Element

Description

Mod. Amt.

Adjusts the amount of envelope applied to the filter cutoff (range:

0.0% – 100%). To increase the amount of modulation applied to
the 

Cutoff

, turn the 

Mod. Amt.

 knob clockwise by clicking and

dragging upwards.

Decay

Adjusts the rate at which the sound fades to silence (range: 0.0% –

100%). To increase the decay amount, turn the 

Decay

 knob

clockwise by clicking and dragging upwards.

Tone Section

 

Drive

Adjusts the amount of drive (range: -100% – 100%); -100%
increases the input level for the filter, driving the signal internally
into saturation, and 100% controls the drive level of the distortion
at the end of the signal chain. To adjust the amount of drive, turn
the 

Drive

 knob by clicking and dragging upwards or downwards.

Note Section

 

Glide Time

Adjusts the time it takes to glide from one pitch to the next (range:
10 ms – 1000 ms). To adjust the amount of glide time, turn the

Glide Time

 knob by clicking and dragging upwards or downwards.

Advanced Page

For this module the 

Advanced

 page contains just one parameter.

Element

Description

Note Section

 

Glide

Globally enables the glide parameter. Once set to on, the note will
continuously play in a monophonic manner.

Using the Bass Synth

Bass Synth – General Handling

 

MASCHINE MIKRO - Manual - 445

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands