manualshive.com logo in svg

Native Instruments Maschine Mikro MK2, Manual

Share
Download
Native Instruments Maschine Mikro MK2 Manual Download Page 427

Element

Description

HARMONICS Section

 

KTr. Mode

 (Key

Tracking Mode)

Selects from two key tracking modes: 

Harmonic

 (default) and

Dissonant

.

In 

Harmonic

 mode all oscillators track the 

Tune

 parameter (on the

Main

 page, see above) and your keyboard evenly. Therefore, the

drum stays in tune with itself as the 

Tune

 parameter is adjusted,

and can be played chromatically across a keyboard or the pads.
In 

Dissonant

 mode the oscillators track the 

Tune

 parameter you’re

your keyboard) unevenly. Therefore, the drum produces dissonant,
detuned harmonics when the 

Tune

 parameter is adjusted or when

you play different notes on a keyboard or the pads.

Freq A

Adjusts the pitch of oscillator A within the feedback oscillator bank,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 50.0 %).

Freq B

Adjusts the pitch of oscillator B within the feedback oscillator bank,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 50.0 %). Note that this parameter has no effect
when 

FM

 and 

AM

 are set to zero (see below).

Freq C

Adjusts the pitch of oscillator C within the feedback oscillator bank,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 29.1 %). Note that this parameter has no effect
when 

FM

 and 

AM

 are set to zero (see below).

FM

Adjusts the amount of frequency modulation within the feedback
oscillator bank, measured as a percentage. Frequency modulation
tends to add bell-like, ringing overtones. Available values range
from 0.0 to 100.0 % (default: 34.4 %).

AM

Adjusts the amount of amplitude modulation within the feedback
oscillator bank, measured as a percentage. Amplitude modulation
tends to add brash, bright overtones. Available values range from
0.0 to 100.0 % (default: 18.6 %).

Using the Drumsynths

The Percussions

 

MASCHINE MIKRO - Manual - 427

Summary of Contents for Maschine Mikro MK2

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands