Native Instruments Maschine Mikro MK2, Manual

Page: 765 / 928

The Ideas view.
▪
At the top you can see Scene slots. The selected Scene is highlighted.
▪
The selected Scene displays the selected Patterns for the current Scene.
Scene Mode on the Controller
The Scene mode is where you select and manage your Scenes.
To enter Scene mode on your controller:
1.
Press SCENE to enter Ideas view.
2. Press and hold SCENE (you can pin it by pressing CONTROL at the same time).
→
Your controller switches to Scene mode. This is indicated by the lit SCENE button.
Now the pads on your controller represent the 16 Scene slots of the current Scene bank:
▪
The fully lit pad indicates the selected Scene slot.
▪
Dim lit pads indicate Scene slots containing a Scene.
▪
Unlit pads represent empty Scene slots.
In addition, the Scene mode provides useful Scene management commands. These are descri-
bed in the following sections.
16.2.2 Creating Scenes
You can create a new Scene directly in the Ideas view.
Working with the Arranger
Using Ideas View
MASCHINE MIKRO - Manual - 765