Native Instruments Maschine Mikro MK2, Manual

Page: 793 / 928

→
The Scene will be shortened, and if the adjustment is shorter than the referenced Pattern
a small Truncated Clip marker will appear on the right-hand side of the Section to indi-
cate that a part of the Scene is hidden. Only the visible part of the Scene will be audible
during playback.
When adjusting the size of a Section the following rules apply:
▪
The value set in the Arrange Grid is used for length increments. For more information on
Arrange Grid, read:
↑
16.6, The Arrange Grid .
▪
When [Shift] is pressed while changing the length, the value set in the Step Grid is used.
For more information on Step Grid, read:
↑
11.1.7, Adjusting the Step Grid and the Nudge
Grid .
▪
The minimum length a Section marker can be dragged without modifier is one Arrange Grid
increment.
▪
When [Shift] is pressed, the minimum length a Section marker can be dragged is one Step
Grid increment.
▪
The minimum length of a Section equals the minimum Scene length. This can only be ach-
ieved if Arrange Grid or Step Grid is set to
Off .
16.3.6.2 Adjusting the Length of a Section Using the Controller
To adjust the length of a Section using your hardware controller:
1.
Press the SCENE button to enter the Section mode.
2. Press MAIN / CONTROL ( PIN ) to pin the page if required.
3. Select the pad relating to the Section you want to adjust.
4. Press the right arrow below the display to select LENGTH .
Working with the Arranger
Using Song View
MASCHINE MIKRO - Manual - 793