National Instruments AT-MIO-64F-5, User Manual

Page: 38 / 266

Configuration and Installation Chapter 2
AT-MIO-64F-5 User Manual 2-16 © National Instruments Corporation
Pin Signal Name Reference Description (continued)
44 EXTTMRTRIG* DIG GND External Timer Trigger Ð If selected, a
high-to-low edge on EXTTMRTRIG*
results in the output DACs being updated
with the value written to them in the
posted update mode. EXTTMRTRIG*
will also generate a timed interrupt if
enabled.
45 GATE2 DIG GND GATE2 Ð This pin is from the Am9513A
Counter 2 signal.
46 OUT2 DIG GND OUTPUT2 Ð This pin is from the
Am9513A
Counter 2 signal.
47 SOURCE5 DIG GND SOURCE5 Ð This pin is from the
Am9513A
Counter 5 signal.
48 GATE5 DIG GND GATE5 Ð This pin is from the Am9513A
Counter 5 signal.
49 OUT5 DIG GND OUT5 Ð This pin is from the Am9513A
Counter 5 signal.
50 FOUT DIG GND Frequency Output Ð This pin is from the
Am9513A FOUT signal.