National Instruments AT-MIO-64F-5, User Manual, Page: 259 / 266

Index
© National Instruments Corporation Index-17 AT-MIO-64F-5 User Manual
M
MIO subconnector
pin assignments, 2-13, C-1
signal connection descriptions, 2-14 to 2-16, C-2 to C-3
signal connections, 2-18
multiple-analog input channel, programming, 5-11
multiple-channel (scanned) data acquisition timing, 3-10 to 3-12
continuous scanning, 3-11
data acquisition rates, 3-12
interval scanning, 3-12
posttrigger data acquisition timing
continuous scanning, 3-11
interval scanning, 3-12
multiple-channel scanning acquisition rates, A-5
multiplexers, input.
See input multiplexers.
N
NI-DAQ software, 1-3
noise
minimizing environmental noise, 2-37 to 2-38
system noise, A-4
nonlinear errors
differential nonlinearity, A-4
integral nonlinearity, A-3
relative accuracy, A-3
nonreferenced single-ended (NRSE) input
configuration, 2-7
definition, 2-7
differential connections, 2-22 to 2-23
single-ended connections for grounded signal sources, 2-26
NRSE. See nonreferenced single-ended (NRSE) input.
O
offset error, analog output circuitry, A-6
operating environment specifications, A-7
operation of AT-MIO-64F-5.
See theory of operation.
optional equipment, 1-4 to 1-5
optional software, 1-3
OUT, GATE, and SOURCE timing signals, 2-33 to 2-37, 3-21 to 3-22, 3-24
OUT<5..1> bit, 4-54
OUT1 signal, 2-15, 5-23, C-3
OUT2 signal, 2-16, 5-23, C-3
OUT3 signal, 5-23
OUT5 signal, 2-16, 5-23, C-3
OUTEN bit, 5-30
OVERFLOW bit, 4-20, 5-5, 5-16
overvoltage protection, A-4
OVERRUN bit, 4-20, 5-5, 5-16