National Instruments AT-MIO-64F-5, User Manual

Page: 256 / 266

Index
AT-MIO-64F-5 User Manual Index-14 © National Instruments Corporation
FIFO pulsed waveform generation, 3-18 to 3-19
floating signal sources
description of, 2-20
differential connections, 2-23 to 2-24
recommended configurations for ground-referenced and floating signal sources, 2-21
single-ended connections, 2-25
FOUT signal, 2-16, 2-35, 2-36, 3-24, 5-27, C-3
frequency measurement, 2-34 to 2-35
functional overview.
See theory of operation.
G
gain error
analog input circuitry, A-2 to A-3
analog output circuitry, A-6
GATE, OUT, and SOURCE timing signals, 2-33 to 2-37, 3-21 to 3-22, 3-24
GATE1 signal, 2-15, C-3
GATE2 signal, 2-16, C-3
GATE2SEL bit, 4-18, 5-23
GATE5 signal, 2-16, C-3
General Event Strobe Register Group, 4-45 to 4-50
Calibration DAC 0 Load Register, 4-50
DMA Channel Clear Register, 4-46
DMATCA Clear Register, 4-47, 5-23, 5-30, 5-31
DMATCB Clear Register, 4-48, 5-23, 5-30, 5-31
External Strobe Register, 4-49
register map, 4-2
general-purpose timing connections, 2-33 to 2-37
event-counting application with external switch gating, 2-34
frequency measurement, 2-34 to 2-35
GATE, SOURCE, and OUT signals, 2-33 to 2-34
input and output ratings, 2-35 to 2-36
time-lapse measurement, 2-34
ground-referenced signal sources
definition and requirements, 2-20
differential connections, 2-22
recommended configurations for ground-referenced and floating signal sources, 2-21
single-ended connections, 2-26
H
hardware
installation, 2-10 to 2-11
resetting after data acquisition operation, 5-16 to 5-17
I
immediate update mode, 3-14 to 3-15
initialization
Am9513A System Timing Controller, 5-2 to 5-3