National Instruments AT-MIO-64F-5, User Manual

Page: 261 / 266

Index
© National Instruments Corporation Index-19 AT-MIO-64F-5 User Manual
interrupt programming, 5-31
RTSI switch signal connections, 5-28
single-channel data acquisition sequence, 5-5 to 5-6
single conversions
generating, 5-5
reading results, 5-5
pseudosimultaneous scanning, 5-7
pulse-width measurement, 2-32
pulsed cyclic waveform generation, 5-21 to 5-23
pulses, producing, 2-33
R
referenced single-ended (RSE) input
configuration, 2-7
definition, 2-7
single-ended connections for floating signal sources, 2-25
registers
ADC Event Strobe Register Group, 4-35 to 4-40
CONFIGMEMCLR Register, 4-29, 4-36, 5-10, 5-11
CONFIGMEMLD Register, 4-29, 4-37, 5-10, 5-11
DAQ Clear Register, 4-38, 5-10, 5-30, 5-31
DAQ Start Register, 4-39
Single Conversion Register, 4-40
Am9513A Counter/Timer Register Group, 4-51 to 4-54
Am9513A Command Register, 4-53
Am9513A Data Register, 4-52
Am9513A Status Register, 4-54
programming, 5-11 to 5-15, 5-23 to 5-25, 5-27
resetting after data acquisition operation, 5-16 to 5-17
resource allocation programming considerations, 5-1
Analog Input Register Group, 4-23 to 4-30
ADC FIFO Register, 4-24 to 4-25, 5-5, 5-16, 5-31
CONFIGMEM Register, 4-26 to 4-30, 5-10, 5-11
Analog Output Register Group, 4-31 to 4-34
analog output voltage versus digital code, 4-31 to 4-32
DAC0 Register, 4-33
DAC1 Register, 4-34
Configuration and Status Register Group, 4-4 to 4-22
Command Register 1, 4-5 to 4-7
Command Register 2, 4-8 to 4-10, 5-31
Command Register 3, 4-11 to 4-15
Command Register 4, 4-16 to 4-18
Status Register 1, 4-19 to 4-21
Status Register 2, 4-22, 5-26
DAC Event Strobe Register Group, 4-41 to 4-44
DAC Clear Register, 4-44, 5-23, 5-26, 5-30
DAC Update Register, 4-43
TMRREQ Clear Register, 4-42, 5-23, 5-26, 5-30, 5-31
description format, 4-3
Digital I/O Register Group, 4-55 to 4-57
Digital Input Register, 3-19 to 3-20, 4-56