background image

1

Notice to End Users

This User’ s Guide & Technical Reference is for assisting system
manufacturers and end users in setting up and installing the mainboard.

Every effort has been made to ensure that the information in this manual
is accurate. Soltek Computer Inc. is not responsible for printing or
clerical errors. Information in this document is subject to change without
notice and does not represent a commitment on the part of Soltek
Computer Inc.

Companies and products mentioned in this manual are for identification
purposes only. Product names appearing in this manual may or may not
be registered trademarks or copyrights of their respective companies.

SOLTEK COMPANY INC. PROVIDES THIS MANUAL “ASIS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
SOLTEK COMPUTER INC. BE LIABLE FOR ANY LOSS OR PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF
BUSINESS, OR FOR INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES OF ANY KIND, EVEN IF SOLTEK
COMPUTER INC. HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN
THIS MASNUAL OR PRODUCT.

 Copyright 1999 Soltek Computer Inc. All rights reserved

WebSite http ://www.soltek.com.tw
E-Mail

:[email protected]

Edition

:October 1999

Version

:4.0

 SL-67G60, SL-67G64, SL-67G30  SERIALS

Summary of Contents for SL-67G30


















































Reviews: