Nanosurf easyScan 2 AFM, Operating Instructions Manual

Page: 25 / 164

S
TORING THE
I
NSTRUMENT
25
First all status lights on top of the Controller briefly light up. Then the Scan
Head lights and the lights of the detected modules will start blinking, and
all other status lights turn off. The status lights remain blinking until the
Controller is initialised by starting the easyScan 2 software.
Storing the Instrument
If you have to send in the instrument, transport it or if you are not using it
for some time, please pack it in the shipping package or instrument case.
- Turn off the instrument as described in section Finishing (p.58), and
remove all cables.
- Pack all components as shown in figure Packing .
Packing: The easyScan 2 AFM system packed in the Instrument Case