Nanosurf easyScan 2 AFM, Operating Instructions Manual

Page: 98 / 164

H
ARDWARE SETUP
98
User Output 1, 2
The output value of the user output.
Config...
Opens the User Signal Editor dialog.
The User Signal Editor
The User Signal Editor dialog is used for editing the calibration of the User
input signal. It can be reached through the User Input/Output section of
the Operating Mode Panel. The settings made in this dialog are stored in
the Scan head calibration file.
Signal
Name
The name of the user signal. This name is used throughout the program to
refer to the user signal.
Unit
The base unit of the physical signal, without prefix (i.e. m, not nm or µm).
Calibration
The physical signal values that correspond to the maximum and minimum
signal voltages should be entered here. Prefixes can be used here.