Nanosurf easyScan 2 AFM, Operating Instructions Manual

Page: 112 / 164

H
ARDWARE SETUP
112
The Edit Access Codes Dialog
The Edit Access Codes Dialog is used to enter the access code for software
modules. At the moment, the only software module is the scripting inter-
face. The dialog is accessed via the menu entry ‘Options>Config Access
Codes...’
The Scan head Diagnosis dialog
The Scan head Diagnosis dialog is opened via the menu ‘Options>Check
Scan Head...’. In it, the controller reports the current status information of
the sensor or the approach platform. If the Status light on the easyScan 2
controller is blinking red, more detailed information about the failure is
displayed in the ‘Microscope Diagnosis’ dialog.
Simulate Microscope
Check or uncheck the menu item ‘Options>Simulate Microscope’ to enter
and exit the simulation mode. Once the simulation mode is active, the first
field in the status bar of the easyScan 2 software displays the text ‘Simula-
tion’, otherwise this field displays the text ‘Online’.