Nanosurf easyScan 2 AFM, Operating Instructions Manual

Page: 134 / 164

V
IEWING MEASUREMENT DATA
134
Viewing measurement data
Measurement data are displayed in charts. Charts are used in Measurement
document windows, the Imaging window and the Spectroscopy window.
The measurement settings are displayed in the Data Info panel.
Charts
A Chart is a graphical representation of the measured data, and additional
elements that give information about the chart itself (figure
Elements of a
Chart ).
These elements show the displayed Signal, Chart type, the type of Filtering
applied to the data, and the Color scale used to display the data. The Color
scale shows which measured signal level is mapped to which colour. The
colour mapping can be changed using the Color Palette dialog, described
further on in this section. The Data range indicator shows the range of
possible measurement values that is occupied by the measured data.
The Chart bar is used to create new charts and to modify their properties.
The chart configuration of the Imaging and Spectroscopy window can be
saved to a file. The chart configuration of the measurement documents is
saved together with the document.
Elements of a Chart
Signal
Line selection arrow
Data range indicator
Color scale
Data filter
Chart range