Nanosurf easyScan 2 AFM, Operating Instructions Manual

Page: 93 / 164

C
ONTROL PANELS
93
tion limits or timing limits. The desired value is automatically changed to
the nearest possible value.
Storing and retrieving measurement parameters
All measurement parameters are stored in a configuration file with the
extension ‘.par’. When the easyScan 2 software is started, default values are
loaded from a file that is selected in the Controller Configuration Dialog
(section
The Controller Configuration dialog (p.110)). Functions for storing
and retrieving parameters are accessed via the menu ‘File>Parameters’.
‘Save’ saves the parameters to the currently selected parameter file. The
name of this file is indicated in the status bar at the bottom of the main
window.
‘Save as...’, saves the parameters under a new file name.
‘Load’ loads a previously saved parameter file.
IMPORTANT
When you have not loaded another file, ‘Save’, will overwrite the original
default parameter file with you current settings.