NAiS FP Series, User Manual

Page: 40 / 326

FP
Σ
3.3 Expansion Method of FP
Σ
Expansion Unit
3 - 5
3.3 Expansion Method of FP
Σ
Expansion Unit
The dedicated expansion unit for FP
Σ
is expanded by connecting to the left side of the
control unit. Because unit expansion is done using the left-side connector for FP
Σ
expansion and expansion hook on the side of the unit, no expansion cable is needed.
1
Remove the cover on the left side of the unit so that the internal left-side connector for
FP
Σ
expansion is exposed.
2
Raise the expansion hooks on the top and bottom sides of the unit with a screwdriver.
3
Align the pins and holes in the four corners of the control unit and expansion unit, and
insert the pins into the holes so that there is no gap between the units.
4
Press down the expansion hooks raised in step 2 to secure the unit.