NAiS FP Series, User Manual

Page: 87 / 326

FP
Σ
High-speed Counter and Pulse Output Functions
6 - 12
6.3.3 Min. Input Pulse Width
The minimum input pulse width indicated below is necessary for the period
T (1/frequency).
T
T
2
T
2
Single phase
T
4
T
T
4
T
4
T
4
Two-phase
Figure 67: FP
Σ
High-speed counter function
- min. input pulse width (single phase)
Figure 68: FP
Σ
High-speed counter function
- min. input pulse width (two-phase)
6.3.4 I/O Allocation
The inputting and outputting, as shown in the table on page 6 - 5, will differ depending
on the channel number being used.
The output turned on and off can be specified from Y0 to Y7 as desired with instructions
F166 (HC1S) and F167 (HC1R) .
X0
X2
Yn
*
Count input
Reset input
On and off output
When using CH0 with incremental input and reset input
* The output turned on and off when the target values match can be specified from Y0
to Y7 as desired.
Figure 69: FP
Σ
High-speed counter function - I/O allocation-1
X0
X2
A phase input
Reset input
Yn
*
On and off output
X1
B phase input
When using CH0 with two-phase input and reset input
* The output turned on and off when the target values match can be specified from Y0 to Y7
as desired.
Figure 70: FP
Σ
High-speed counter function - I/O allocation-2