NAiS FP Series, User Manual

Page: 279 / 326

FP
Σ
Specifications
13 - 30
(A: Available, N/A: Not available)
Address Name Description Reading Writing
DT90025 Mask condition monitoring
register for interrupts
(INT 0 to 7)
The mask conditions of interrupts using ICTL
instruction can be stored here. Monitor using
binary display.
0: interrupt disabled (masked)
1: interrupt enabled (unmasked)
15 11 7 3 0 (Bit No.)
23 19 16 (INT No.)
A N/A
DT90026 Not used N/A N/A
DT90027 Periodical interrupt
interval (INT 24)
The value set by ICTL instruction is stored.
- K0: periodical interrupt is not used
- K1 to K3000: 0.5ms to 1.5s or 10ms to 30s
A N/A
DT90028 Not used N/A N/A
DT90029 Not used
DT90030 Message 0 The contents of the specified message are stored
in these special data registers when F149 (MSG)
A N/A
DT90031 Message 1
in these special data registers when F149 (MSG)
instruction is executed.
DT90032 Message 2
instruction is executed.
DT90033 Message 3
DT90034 Message 4
DT90035 Message 5
DT90036 Not used N/A N/A
DT90037 Operation auxiliary
register for search
instruction “ F96 (SRC) ”
The number of data that match the searched data
is stored here when F96 (SRC) instruction is
executed.
A N/A
DT90038 Operation auxiliary
register for search
instruction “ F96 (SRC) ”
The position of the first matching data is stored
here when an F96 (SRC) instruction is executed.
A N/A
DT90039 Not used N/A N/A
DT90040 Potentiometer (volume)
input V0
The potentiometer value (K0 to K1000) is stored
here. This value can be used in analog timers and
other applications by using the program to read this
A N/A
DT90041 Potentiometer (volume)
input V1
other applications by using the program to read this
value to a data register.
V0
→
DT90040
V1
→
DT90041
DT90042 Used by the system. N/A N/A
DT90043 Used by the system. N/A N/A