NAiS FP Series, User Manual

Page: 157 / 326

FP
Σ
Communication Function 1 Computer Link
8 - 12
Setting of system register
To carry out 1:1 communication using a computer link, the system registers should be
set as shown below.
Settings when using the COM. 1 port
No. Name Set value
No. 410 Unit No. for COM.1 port 1
No. 412 Communication mode for COM.1 port Computer link
No. 413 Communication format for COM.1 port Character bit: 8 bits . . . .
Parity check: Odd . . . . .
Stop bit: 1 bit . . . . . . . . .
Terminator: CR . . . . . .
Header: STX not exist . . . . . . . . .
No. 415 Baud rate setting for COM.1 port 9600 bps to 115200 bps
Settings when using the COM. 2 port
No. Name Set value
No. 411 Unit No. for COM.2 port 1
No. 412 Communication mode for COM.2 port Computer link
No. 414 Communication format for COM.2 port Character bit: 8 bits . . . .
Parity check: Odd . . . . .
Stop bit: 1 bit . . . . . . . . .
Terminator: CR . . . . . .
Header: STX not exist . . . . . . . . .
No. 415 Baud rate setting for COM.2 port 9600 bps to 115200 bps
The communication format and baud rate (transmission speed) should be set to match
the connected computer.