NAiS FP Series, User Manual

Page: 199 / 326

FP
Σ
Communication Function 2 General-purpose Serial Communication
9 - 32
9.5.3 Setting of System Register
The following types of communication cassettes can be used with 1: N general-purpose
serial communication.
Settings when using the COM. 1 port
No. Name Set value
No. 410 Unit No. 1 to 32 (Set the desired unit No.)
No. 412 Communication mode for COM.1 port General communication
No. 413 Communication format for COM.1 port Character bit: 8 bits . . . .
Parity check: Odd . . . . .
Stop bit: 1 bit . . . . . . . . .
Terminator: CR . . . . . .
Header: STX not exist . . . . . . . . .
No. 415 Baud rate setting 9600 bps
No. 416 Starting address for data received Set the desired address.
No. 417 Buffer capacity setting for data received Set the desired capacity. (Max. 2,048 byte)
Settings when using the COM. 2 port
No. Name Set value
No. 411 Unit No. 1 to 32 (Set the desired unit No.)
No. 412 Communication mode General communication
No. 414 Communication format Character bit: 8 bits . . . .
Parity check: Odd . . . . .
Stop bit: 1 bit . . . . . . . . .
Terminator: CR . . . . . .
Header: STX not exist . . . . . . . . .
No. 415 Baud rate setting 9600 bps
No. 418 Starting address for data received Set the desired address.
No. 419 Buffer capacity setting for data received Set the desired capacity. (Max. 2,048 byte)
The communication format and baud rate (transmission speed) should be set to match
the connected device.