NAiS FP Series, User Manual

Page: 184 / 326

FP
Σ
9.3 Connection Example with External Devices
9 - 17
Setting of system register
In the default settings, the COM. port is set to the computer link mode. To carry out
1 :1 communication using general-purpose serial communication, the system registers
should be set as shown below.
Communication format setting for FP
Σ
•
Settings when using the COM. 1 port
No. Name Set value
No. 412 Communication mode General communication
No. 413 Communication format Character bit: 8 bits . . . .
Parity: Odd . . . . . . . . . .
Stop bit: 1 bit . . . . . . . . .
Terminator: CR . . . . . .
Header: STX not exist . . . . . . . . .
No. 415 Baud rate 9600 bps
No. 416 Starting address for data received DT200
No. 417 Buffer capacity setting for data received 100 byte
•
Settings when using the COM. 2 port
No. Name Set value
No. 412 Communication mode General communication
No. 414 Communication format Character bit: 8 bits . . . .
Parity: Odd . . . . . . . . . .
Stop bit: 1 bit . . . . . . . . .
Terminator: CR . . . . . .
Header: STX not exist . . . . . . . . .
No. 415 Baud rate 9600 bps
No. 418 Starting address for data received DT200
No. 419 Buffer capacity setting for data received 100 byte