NAiS FP Series, User Manual

Page: 287 / 326

FP
Σ
Specifications
13 - 38
(A: Available, N/A: Not available)
Address Name Description Reading Writing
DT90170 MEWNET-W0
PLC link status
Duplicated destination for PLC inter-link address A N/A
DT90171
PLC link status
Counts how many times a token is lost.
DT90172 Counts how many times two or more tokens are
detected.
DT90173 Counts how many times a signal is lost.
DT90174 No. of times undefined commands have been
received
DT90175 No. of times sum check errors have occurred
during reception
DT90176 No. of times format errors have occurred in re-
ceived data
DT90177 No. of times transmission errors have occurred
DT90178 No. of times procedural errors have occurred
DT90179 No. of times overlapping parent units have occurred
DT90180
to
DT90189
Not used N/A N/A
DT90190 High-speed counter control
flag monitor for ch0 0
This monitors the data specified in DT90052.
1 2 3 4
A N/A
DT90191 High-speed counter control
flag monitor for ch1
DT90192 High-speed counter control
flag monitor for ch2
Home near input
High- speed counter instruction
Pulse output
H d
0: Invalid/1: Valid
0: Continue/1: Clear
0: Continue/1: Stop
E bl / Di bl
DT90193 High-speed counter control
flag monitor for ch3
Hardware reset
Count
Software reset
0: Enable/1: Disable
0: Enable/1: Disable
0: No/1: Yes
DT90194
to
DT90199
Not used N/A N/A
DT90200 High-speed
counter elapsed
For ch2 The elapsed value (32-bit data) for the high-speed
counter is stored here. The value can be read and
A A
DT90201
counter elapsed
value
counter is stored here. The value can be read and
written by executing F1 (DMV) instruction.
DT90202 High-speed
counter target
value
For ch2 The target value (32-bit data) of the high-speed
counter specified by the high-speed counter
instruction is stored here.
Target values have been preset for the various
A N/A
DT90203
Target values have been preset for the various
instructions, to be used when the high-speed
counter related instruction “ F166, F167, F171 , F175
or F176 ” is executed. The value can be read by
executing F1 (DMV) instruction.
DT90204 High-speed
counter elapsed
For ch3 The elapsed value (32-bit data) for the high-speed
counter is stored here The value can be read and
A A
DT90205
counter elapsed
value
counter is stored here.The value can be read and
written by executing F1 (DMV) instruction.