NAC Image Technology SP-642, User Manual

Page: 244 / 436

7 - 6 (00292)H
■Conversion Algorithm Settings
Sets the method of converting images from MCFF.
The four conversion methods are as follows.
Method A An algorithm compatible with the previous version of fxLink.
Method B A new conversion algorithm that converts to high resolution images with distinct
color and good contrast. Method B is the default. Includes methods B1 and B2.
B1 Default conversion method.
B2 Better resolution than B1 but requires more conversion time.
B3 Reduce moire and false color than B2 but requires more conversion time.
By Method B3, if Low Pass Filter is ON, a noise will be reduced, without
deteriorating image quality. Enhance is processed oblique direction in
addition vertically and horizontally.
Method C
A method that uses the optional PCI image conversion board that converts images
to the same quality as method B but at a high speed.
This method applies to the MEMRECAM fx series excluding the pencil cameras
for the fx RX-5, fx RX-5G PM units.
Method D
Method of using the GPU installed graphic board that corresponds to the optional
“MCFF high speed conversion software” that performs high speed playback and
conversion of MCFF files so the image has the same quality as Method B.
Method applies to the MEMRECAM HX, GX, Q and fx series excluding the pencil
cameras for the fx RX-5, fx RX-5G PM units.
Includes methods D1 and D2. There is a method of D1, D2, D3, conversion time
does not change almost.
D1 Default conversion method.
D2 Better resolution than D1.
D3 Reduce moire and false color than D2.
By Method D3, if Low Pass Filter is ON, a noise will be reduced, without
deteriorating image quality. Enhance is processed oblique direction in
addition vertically and horizontally.