NAC Image Technology SP-642, User Manual

Page: 315 / 436

(00292)H 10 - 7
10.3 Camera Factory Settings
Reverts the HX and GX cameras to the factory settings.
If the factory settings are implemented, the image data recorded in the camera
memory is lost. If there is still data that is needed, make sure to download the
image data before implementing the factory settings.
Change the settings with the following procedures.
Confirm that the HX and GX cameras with the settings
have started up and the PC and cameras have connected
to the network.
Additionally, confirm that the camera is not in use.
Startup the HXUtility and click "Factory Settings".
The "Select Camera" dialogue is displayed with a list of
cameras currently connected to the network.
An "x" is shown on the camera icon for the cameras in
use.
Check a camera to set and click "OK".
A confirmation dialogue appears. Click "Yes" to change
to the factory settings and restart the camera.
Caution