NAC Image Technology SP-642 User Manual Download Page 122

Page: 122 / 436

4 - 46

(00292)H

■AOI(Brightness Detection Area, Area Of Interest)

With AE control or image trigger, the subject range (AOI) must be specified. To specify the AOI,
use any of the following.

・

Select the camera in the “Item List” and select "AOI" from the "Control" menu.

・

Select "AOI" from the "Control" window.

・

Select "AOI" from the "Camera Details" dialogue.

・

Select "AOI" from the "Recording Parameters" in the "List of Camera Settings".

Select any of the following for AOI.

FULL

The entire frame is the range.

CENTER

50% of a rectangle (area of 25%) from the center of the frame is the
range.

UPPER

The upper half of the frame is the range.

LOWER

The lower half of the frame is the range.

LEFT

The left half of the frame is the range.

RIGHT

The right half of the frame is the range.

CUSTOM

The rectangle specified is the range.

Summary of Contents for SP-642





















































































































































































































































































































































































































































Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands

NAC Image Technology SP-642, User Manual

Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands