NAC Image Technology SP-642 User Manual Download Page 392

Page: 392 / 436

14 - 8 (00292)H

■Failure downloading camera image data

The following message appears when downloading.

Displayed when there is not enough free space in the disc drive and the camera image data for the

specified range cannot be downloaded. Either change the destination drive for the camera image

data or delete unnecessary files in the destination drive and make the download range smaller.

■ The free space shown in the USB is less than the actual

If the USB media format is wrong, it will be treated as if the free space is less than the actual. If

the camera power was turned off when writing to the USB media, the USB cable was removed or

the media was impacted or shaken during writing, the USB media format may be wrong. In this

case, check the options for “Check for Errors” in the disc properties corresponding to the

Windows PC and perform the necessary repairs.

■Unable to download images larger than 4GB

Check the file system format of the PC used. If the format is FAT32, files larger than 4GB cannot be

downloaded. Change the file system format to NTFS to download files larger than 4GB.

■ “There is no image data” is displayed on the monitor

If this is displayed, for some reason, the camera image download has failed and the camera image

data is not in the MCFF file.

Summary of Contents for SP-642





















































































































































































































































































































































































































































Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands

NAC Image Technology SP-642, User Manual

Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands