NAC Image Technology SP-642, User Manual

Page: 139 / 436

(00292)H 4 - 63
・
MULTI1
This is a recording method that synchronizes with the timing trigger signals at the start of
exposure for the trigger frame and sets the trigger frames thereafter. The number of blocks
(number of possible trigger inputs) corresponding to the number of frames per block is
determined.
MULTI1 (A) “All Blocks” mode for automatic block switching.
MULTI1 (C) “Continuous” mode to perform repeated recording until “STOP” is
clicked.
・
MULTI2
Method to input trigger signals where synchronous recording is performed with internal
synchronization/IRIG signals/EST signals.
Also, it is possible to combine with the frame straddling function.
For each block, the trigger frames before and after can be recorded.
The maximum number of blocks (number of possible trigger inputs) is 64.
Therefore, if the number of frames per block is small, the entire segment range
cannot be recorded.
MULTI2 (A) “All Blocks” mode for automatic block switching.
MULTI2 (C)
“Continuous” mode to perform repeated recording until “STOP” is
clicked.
・
MULTI3
Method identical to that in MULTI2 but there are no limitations to the number of trigger
inputs.
The number of blocks (number of possible trigger inputs) corresponding to the number of
frames per block is determined.
However, recording is not possible prior to the trigger frame.
MULTI3 (A) “All Blocks” mode for automatic block switching.
MULTI3 (C)
“Continuous” mode to perform repeated recording until “STOP” is
clicked.
(6) Linear Recording
With linear recording, after switching to ARM, it automatically switches to REC. If “Trigger”
is clicked during the REC mode, block partitioning is paused.
If “View/Record” is clicked during the PAUSE mode, recording is started in REC.
Recording ends at the end of the segment, and then it switches to READY.
・
There are no settings for automatic segment switching.
・
External trigger input is not available with the linear recording method.
・
There are no limits to the number of pauses but the number of blocks that
can be partitioned (the first frame is recorded, jumping during playback is
possible) is 64.
Caution
Caution