NAC Image Technology SP-642 User Manual Download Page 228

Page: 228 / 436

6 - 8

(00292)H

For HX

，

GX-8 frame straddling photography, select "ON", "OFF" to apply to the HX and

GX-8 cameras.

ON

Exposure starts as the sync signals increase. Recording of the second
frame occurs at the first synchronous signal.

OFF

Frame straddling recording is not performed, and normal recording takes
place.

The HX

，

GX-8 frame straddling display is applied when HX and GX-8 camera frame

straddling photography is ON. Select from "ANY", "1

st"

and " 2

”".

ANY

Displays the latest image without distinguishing between the 1

and 2

frames of the frame straddling images.

1st

Displays only the 1

frame of the frame straddling images.

2nd

Displays only the 2

frame of the frame straddling images.

Summary of Contents for SP-642





















































































































































































































































































































































































































































Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands

NAC Image Technology SP-642, User Manual

Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands