NAC Image Technology SP-642 User Manual Download Page 410

Page: 410 / 436

B - 2 (00292)H

Conversion Settings File (FCV Files)

FCV is the files to describe setting parameters of format conversion.

When the size of AVI CODEC

configuration parameter is 512 characters or more, CODEC Configuration

File (CSDT File) will be created, at where FCV file is, and the parameter will be saved at CODEC

Configuration File.

The FCV file contains a COMP_STATE_EX key corresponding to a name of the CODEC configuration

file.

This describes the contents of the conversion settings files (FCV).

[CONV_PARAM]

This item indicates the following items as conversion setting items.

*** Settings for Conversion Save Range ***

・

SEG_SEL

Conversion segment number

0: Only 0 is valid with the MEMRECAM ci series

・

BEGIN_FRAME

Conversion start frame (With 1 block)

・

END_FRAME

Conversion end frame (With 1 block)

If either the BEGIN_FRAME, END_FRAME are not included in the MCFF

frame range, or if BEGIN_FRAME > END_FRAME, the settings for the

conversion save range are disabled.

・

BEGIN_FRAMEn

Conversion start frame for block n

・

END_FRAMEn

Conversion end frame for block n

n is the number of blocks 1~16 (GX cameras), 1~64 (HX cameras).

The part of the BEGIN_ FRAMEn, END_ FRAMEn range and the MCFF

range overlapping becomes the conversion save range. If the BEGIN_

FRAMEn, END_ FRAMEn range and the MCFF range do not overlap, block n

data is not converted.

・

BEGIN_TIME

Conversion start time (Seconds. With 1 block)

・

END_TIME

Conversion end time (Seconds. With 1 block)

If either the BEGIN_TIME, END_TIME are not included in the MCFF frame

range, or if BEGIN_TIME > END_TIME, the settings for the conversion save

range are disabled.

Summary of Contents for SP-642





















































































































































































































































































































































































































































Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands

NAC Image Technology SP-642, User Manual

Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands