NAC Image Technology SP-642 User Manual Download Page 126

Page: 126 / 436

4 - 50

(00292)H

Custom DRES

(for HX cameras)

The HX camera can have custom settings in the DRES mode.

Dual : Method using a two stage shutter (dual slope).

Triple : Method using a three stage shutter (triple slope).

Dual

Triple

Each type of exposure time is shown on the graph for numerical confirmation (0.1μ sec units).

SH : Exposure time for low brightness. The same value as the shutter setting.

DRES1: Exposure time for high brightness. Set shorter than the normal shutter.

DERS2: Exposure time set even shorter for high brightness portions. Can be used when triple

is selected.

Also, the graph corresponding to the shutter/property selection is shown on the confirmation graph.

Shutter:

Graph showing each type of exposure time and the timing.

Properties:

Graph showing the properties of the values for the brightness of the light

source.

Check the fit display and the display range of the light source brightness is

automatically adjusted.

Select Dual/Triple for slider operation or numerical input of each exposure time.

Dual values adjust the SH and DRES1 ratio.

Triple values adjust the DRES1 and DRES2 ratio.

Press the button below the confirmation graph to easily set the exposure time.

LOW

Ratio corresponding to about 400% of the dynamic range.

MID

Ratio corresponding to about 800% of the dynamic range.

HIGH

Ratio corresponding to about 1600% of the dynamic range.

+LOW

Ratio corresponding to about 3200% of the dynamic range.

+MID

Ratio corresponding to about 6400% of the dynamic range.

+HIGH Ratio corresponding to about 12800% of the dynamic range.

Select Dual/Triple and specify each exposure time with the slider or numerical input.

Dual

Adjust the SH and DRES1 ratio.

Triple

Adjust the DRES1 and DRES2 ratio.

If the exposure time on the confirmation graph is shown in red, the DRES mode cannot
be used properly.
The following settings must be changed.

・

Lower the frame rate

・

Extend the shutter settings

・

Extend the DRES1 and DRES2 times

Caution

Summary of Contents for SP-642





















































































































































































































































































































































































































































Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands

NAC Image Technology SP-642, User Manual

Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands