NAC Image Technology SP-642 User Manual Download Page 393

Page: 393 / 436

(00292)H 14 - 9

■ A checkerboard pattern is displayed on the monitor

Consider the following causes.

・

For some reason, the camera image download has failed and the camera image data is not in the

MCFF file.

・

During sync display, the current frame time is outside the range for the image data.

・

The live image was set to “Do Not Display” under the “Camera Live Display

・

Download”

tab in the options menu or the camera connection settings when connecting the camera.

■ The image does not change the image quality of the MCFF is adjusted

1) Gain and knee are not reflected

If recording MCFF images in the DRES mode, the gain and knee settings are disabled.

If the MCFF image properties in the DRES mode are LOW/MID/HIGH, record in the DRES

mode.

2) Gain, gamma and knee are not reflected

If the luminance in the image quality adjustment menu is LINEAR or CUSTOM, the gain,

gamma and knee settings are disabled.

If the luminance in the image quality adjustment menu is NORMAL, the gain, gamma and

knee settings are enabled.

Summary of Contents for SP-642





















































































































































































































































































































































































































































Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands

NAC Image Technology SP-642, User Manual

Search results

Summary of Contents for SP-642

Reviews:

Related manuals for SP-642

Brands by name

Popular brands