NAC Image Technology SP-642, User Manual

Page: 132 / 436

4 - 56 (00292)H
■Reset Trigger
(HX and GX-8 Cameras)
The exposure timing of the HX cameras and the GX-8 camera can be synchronized with external
devices using trigger signals. Set the GX camera time to trigger reset and as soon as the trigger
signals are detected during recording, the exposure up to that time is stopped, and exposure of a
new trigger frame is started so subsequent recording is performed at the specified frame rate.
If performing external synchronous recording when the “HX, GX camera
synchronization” is “EST Synchronization” or “A-EST Synchronization”, the trigger
reset function is disabled. If “GX Camera Time” is set to “Trigger Reset”, that setting is
disabled and the “GX Camera Time” operates as “Internal Camera Time”.
The following functions are disabled when the trigger reset function is used.
・
Operates as “GX Native” when the “Exposure Timing” setting is disabled.
・
Operates with “Exposure Phase” of 0 when the “Exposure Phase” setting is disabled.
・
The “Frame Straddling” function is disabled.
・
Operates as “Time Stamp” OFF when the “Time Stamp” setting is disabled.
Caution
Caution