6 Functions and settings
Maschinenfabrik Reinhausen GmbH 2016
189
5163667/00 EN
TRAFOGUARD® ISM®
Linking SCADA messages
When you link a SCADA message to an event, the device sets the data point
to "On" when the event occurs. When the event stops, the device sets the
data point to "Off". A parameter is available for each available SCADA mes-
sage.
Figure 136: Linking SCADA messages
In order to establish the link, you have to enter the corresponding event
number at the desired parameter.
If you enter event number 500, the link is deactivated.
To link the SCADA message, proceed as follows:
ü
The desired event number is known.
1.
Go to
Settings > Parameters > Link SCADA messages
.
2.
Select the parameter you want.
3.
Enter the desired event number.
4.
Press the
Accept
button to save the modified parameter.
Summary of Contents for TRAFOGUARD ISM
Page 1: ...Monitoring System TRAFOGUARD ISM Operating Instructions 5163667 00 EN ...
Page 222: ......
Page 223: ......
