6 Functions and settings
Maschinenfabrik Reinhausen GmbH 2016
164
5163667/00 EN
TRAFOGUARD® ISM®
Number of stop bits
You can use this parameter to set the number of stop bits.
To set the number of stop bits, proceed as follows:
1.
Go to
Settings > Parameters > IEC
60870-5-103 > Number of stop
bits
.
2.
Set number of stop bits.
3.
Press the
Accept
button to save the modified parameter.
Configuring IEC 60870-5-104 (optional)
If you want to use the IEC 60870-5-104 control system protocol, you must
set the following parameters.
Figure 124: Setting parameters for IEC60870-5-104
IP address
You can use this parameter to assign an IP address to the device.
To set the IP address, proceed as follows:
Assign IP addresses to both web-based visualization and SCADA (optional)
in different subnets. Otherwise you will not be able to establish a connec-
tion.
1.
Go to
Settings > Parameters > IEC
60870-5-104 > IP address
.
2.
Enter IP address.
3.
Press the
Accept
button to save the modified parameter.
Subnet mask
You can use this parameter to set the subnet mask.
6.22.4
Summary of Contents for TRAFOGUARD ISM
Page 1: ...Monitoring System TRAFOGUARD ISM Operating Instructions 5163667 00 EN ...
Page 222: ......
Page 223: ......
